prop shafts

[Gord Souter]

CHUCK>>
Its much easier to put in another prop shaft than change the joints and if
you go to my parts list
#3-19-01 you will; see that I have them for $100.00
If anyone wants my list email me at (info@houseboatvacations.ca)

Also if you are very careful Muratic Acid. As one fellow said (available at
hardware stores ) will clean gas tanks in a few days of rotating to a like
new condition.
I use this stuff all the time in restoration of amphicars, nuts bolts and
small parts.etc.

GORD SOUTER
four amphis


---
[This E-mail scanned for viruses by Orillia ProNet with Declude AntiVirus]

 

[watercar64]

I got the bolts out O.K. and put in mectric bolts
in place of the original , will there be a problem with this;?
olso I have been trying to get in the members area
with celina & elizabeth and it wont let me in ,did they
change the code , I got in before with no problem

 

[WB6WSN]

----- Original Message -----
From: watercar64
To: amphicar-lovers@yahoogroups.com
Sent: Monday, January 12, 2004 7:25 PM
Subject: [amphicar-lovers] prop shafts


I got the bolts out O.K. and put in mectric bolts
in place of the original , will there be a problem with this;?
olso I have been trying to get in the members area
with celina & elizabeth and it wont let me in ,did they
change the code , I got in before with no problem


My bolts there were all severely rusted and/or corroded. Most of the bolt-heads
couldn't be gripped with a socket, box or open-end wrench. Had to crack rust
from hex faces of bolt heads.

Hope you remembered to replace the seals at the hull penetrations. BTW, I notice
that a lot of the original Amphi split-ring lockwashers are bad. A surprising
number will crack and fall off the bolt when you are removing the bolt. I
decided to not re-use any old lockwashers, no matter how good they look.

Ed
El Cajon
67 Rust Guppy


[Non-text portions of this message have been removed]

 

[David Derer]

Larry perhaps You need to sit on it and rotate. I hope this advice
helps. Later Dave the Wave

 

[Larry & Nancy Solheim]

Having been the "butt" of your communications before, Mr. Wave, please know that this is truly appreciated and accepted in the unselfish and giving manner it is offered. I'll be pounding harder today; with a bigger hammer. (It's always good to put my enginering training to use) Much Amphi Love! --Larry

David Derer <dmd@essex1.com> wrote: <blockquote class="replbq" style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid"><tt>Larry perhaps You need to sit on it and rotate. I hope this advice
helps. Later Dave the Wave


</tt>
<div style="WIDTH: 500px; COLOR: #909090; TEXT-ALIGN: center"> <hr style="WIDTH: 500px; BORDER-BOTTOM: 1px; TEXT-ALIGN: left"> <tt>YAHOO! GROUPS LINKS</tt>
<ul><tt> <li type="square">Visit your group "amphicar-lovers" on the web.
</tt> <tt> <li type="square">To unsubscribe from this group, send an email to:
amphicar-lovers-unsubscribe@yahoogroups.com
</tt> <tt> <li type="square">Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.</tt> [/list]
<div style="WIDTH: 500px; COLOR: #909090; TEXT-ALIGN: center"> <hr style="WIDTH: 500px; BORDER-BOTTOM: 1px; TEXT-ALIGN: left">
<!-- |**|end egp html
banner|**| --></blockquote>



<hr size="1">
What are the most popular cars? Find out at Yahoo! Autos