Canadian four amphs
Amphicar Expert
I have not changed most of the prices in my parts list since 2001
but am going threw the whole list now and there are alot of increases going to happen very soon.
go on my web page now and check those big items off as within the month it will be changed!
I am in the process of moving my office to the basement where my parts are kept so that when you phone I can go and manhandle the parts to make sure we have them etc.(really the wife wants the spare bedroom back for all the expecting grand kids!)
I have another load of used parts coming after this eweekend, to go threw and stock.I do not list used parts on my parts list and inventory is growing, so do not be afaid to call or email what you may be looking for.
BTW I was talking with a fellow about front hoods and he was complaining about drilling hole to mAKE HOOD fit on hindges and no metal in front where clamb shells are.I thought everyone knew that I make the best fibreglass front hoods! There are moveable predrilleed and treaded brackets for the hindges,horn hole is cut out and treaded 8mm.Safty at front is drilled threw alu. 6mm tread. catches are threw alum drilled and 4mm tread just as they are on steel hoods..the inside of my hoods are a smooth as the outside and when painted you can not tell they are glass untill you lift them your self as they are very LIGHT!But strong, Ron Trudeau had 3 mermaids laying across his hood for a photo shot in 2005. I used the hood off one of my good Amphicars to make the mold for this glass hood and are almost perfect the way you get them,Just drop on and GOOO!!!!
Come to my Swin in June 25-28 and have a tour of my shop and Parts department.
GORD
but am going threw the whole list now and there are alot of increases going to happen very soon.
go on my web page now and check those big items off as within the month it will be changed!
I am in the process of moving my office to the basement where my parts are kept so that when you phone I can go and manhandle the parts to make sure we have them etc.(really the wife wants the spare bedroom back for all the expecting grand kids!)
I have another load of used parts coming after this eweekend, to go threw and stock.I do not list used parts on my parts list and inventory is growing, so do not be afaid to call or email what you may be looking for.
BTW I was talking with a fellow about front hoods and he was complaining about drilling hole to mAKE HOOD fit on hindges and no metal in front where clamb shells are.I thought everyone knew that I make the best fibreglass front hoods! There are moveable predrilleed and treaded brackets for the hindges,horn hole is cut out and treaded 8mm.Safty at front is drilled threw alu. 6mm tread. catches are threw alum drilled and 4mm tread just as they are on steel hoods..the inside of my hoods are a smooth as the outside and when painted you can not tell they are glass untill you lift them your self as they are very LIGHT!But strong, Ron Trudeau had 3 mermaids laying across his hood for a photo shot in 2005. I used the hood off one of my good Amphicars to make the mold for this glass hood and are almost perfect the way you get them,Just drop on and GOOO!!!!
Come to my Swin in June 25-28 and have a tour of my shop and Parts department.
GORD
