E
Ed Price
Guest
----- Original Message -----
From: bomby74
To: amphicar-lovers@yahoogroups.com
Sent: Sunday, July 06, 2003 7:54 PM
Subject: [amphicar-lovers] Re: Propellor Shaft U-joint Bolts
Ed,
Hold the vise-grips! That's a torks head screw. You can buy this
tool probably at any auto parts store for under $15.00. It looks
like a screw driver with interchangeable tips. Many late model cars
have torks head screws to secure directional lenses so you'll find
other uses for it too.
Since I started my restoration, my tool inventory has grown.
Especially in the metric department. But there's nothing like having
the right tool for the job.
Brian
Absolutely right, Brian. Just last week, I bought a metric Vise-Grip wrench.
It's going to be very good not to have to depend on my metric pipe wrenches.
Ed
El Cajon
67 Rust Guppy
[Non-text portions of this message have been removed]
From: bomby74
To: amphicar-lovers@yahoogroups.com
Sent: Sunday, July 06, 2003 7:54 PM
Subject: [amphicar-lovers] Re: Propellor Shaft U-joint Bolts
Ed,
Hold the vise-grips! That's a torks head screw. You can buy this
tool probably at any auto parts store for under $15.00. It looks
like a screw driver with interchangeable tips. Many late model cars
have torks head screws to secure directional lenses so you'll find
other uses for it too.
Since I started my restoration, my tool inventory has grown.
Especially in the metric department. But there's nothing like having
the right tool for the job.
Brian
Absolutely right, Brian. Just last week, I bought a metric Vise-Grip wrench.
It's going to be very good not to have to depend on my metric pipe wrenches.
Ed
El Cajon
67 Rust Guppy
[Non-text portions of this message have been removed]