U Joints!

[gtpeterp]

I took one of my rear axles in to a driveline shop and they were able
to find an exact match for it! It was somewhat expensive ($80), but
they did not have to drill out the axle or machine down the joint.
They would not give me a model number, but I'm sure they will order
one for you if you call. The company is Driveline Service of Atlanta.
770-242-9365.

 

[gtpeterp]

I took one of my rear axles in to a driveline shop and they were able
to find an exact match for it! It was somewhat expensive ($80), but
they did not have to drill out the axle or machine down the joint.
They would not give me a model number, but I'm sure they will order
one for you if you call. The company is Driveline Service of Atlanta.
770-242-9365.

 

[John Friese]

I've been searching for the exact U joints for the late style
(spindly) drive shafts and believe I have found them. I had one with
a grease fitting at the cross point sent over (from Europe) and it
looks to be fine for the outside joint on the style 4 shaft and both
joints of the style 3 type. I'm currently waiting for several of the
type with the grease fitting on the end cap to arrive (again from
Europe) but it will be a few weeks before they come it. Once they're
all here, I'll check them out to see if they will fit right and let
you know about their price and availability.

John Friese
67 White
67 Red



--- In amphicar-lovers@yahoogroups.com, "gtpeterp" <yahoo@...> wrote:
>
> I took one of my rear axles in to a driveline shop and they were able
> to find an exact match for it! It was somewhat expensive ($80), but
> they did not have to drill out the axle or machine down the joint.
> They would not give me a model number, but I'm sure they will order
> one for you if you call. The company is Driveline Service of Atlanta.
> 770-242-9365.
>

 

[John Friese]

I've been searching for the exact U joints for the late style
(spindly) drive shafts and believe I have found them. I had one with
a grease fitting at the cross point sent over (from Europe) and it
looks to be fine for the outside joint on the style 4 shaft and both
joints of the style 3 type. I'm currently waiting for several of the
type with the grease fitting on the end cap to arrive (again from
Europe) but it will be a few weeks before they come it. Once they're
all here, I'll check them out to see if they will fit right and let
you know about their price and availability.

John Friese
67 White
67 Red



--- In amphicar-lovers@yahoogroups.com, "gtpeterp" <yahoo@...> wrote:
>
> I took one of my rear axles in to a driveline shop and they were able
> to find an exact match for it! It was somewhat expensive ($80), but
> they did not have to drill out the axle or machine down the joint.
> They would not give me a model number, but I'm sure they will order
> one for you if you call. The company is Driveline Service of Atlanta.
> 770-242-9365.
>