tire pressure

D

David Chapman

Guest
Remember the pressure is more for the tyre than to car - so 14psi is right
for the early bias Vredesteins but radials should be run at nearer 35 - and
never less than 25. Ask the manufacturers - ask them nicely and offer some
photos of their tyres on your Amphi and you might even get a free set -
worked for me !

David Chapman
 
D

dougn200

Guest
Hi Mike,

I have the radials that hugh sells and I run 32 in both the front and
back.

Doug
 
C

capon23@aol.com

Guest
<table id="role_body" style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial" bottomMargin="7" leftMargin="7" topMargin="7" rightMargin="7"><font id="role_document" face="Arial" color="#000000" size="2">
The best pressure for a Amphicar is 20lbs on the front and 30lbs on the back no matter the tires..

Take it from a old Corvair guy!

Cigarman</font>


<font style="color: black; font: normal 10pt ARIAL, SAN-SERIF;"><hr style="MARGIN-TOP: 10px">Get a sneak peak of the all-new AOL.com.</font>
 
I

injuneer2003

Guest
Any information about the correct tire pressures to be used with cocker
bias ply tires?

I vaguly remember reading about pressures that are not the same as in
the manual. Is this true?

Can someone shed some light on this subject for me?

Thank You
 
J

John Friese

Guest
Hello,

I've run Coker bias play tires for 6 years and use the original tire
pressures given by Amphicar, 14 in the fronts and 30 in the rears.
Gordon's even sells a replacement placard with the numbers on it.
These pressures work just fine for bias ply tires and I routinely
drive my car at 70 and sometimes drive up to 85 mph with no problems
and no front end "float". Yes, I have a "hot" 1296 engine in it.

John Friese
67 White
67 Red

--- In amphicar-lovers@yahoogroups.com, "injuneer2003"
<injuneer2003@...> wrote:
>
> Any information about the correct tire pressures to be used with cocker
> bias ply tires?
>
> I vaguly remember reading about pressures that are not the same as in
> the manual. Is this true?
>
> Can someone shed some light on this subject for me?
>
> Thank You
>
 
F

Fran

Guest
Re: Re: tire pressure

<table style="BACKGROUND-COLOR: #ffffff" bgColor="#ffffff">
<font face="Century Gothic" size="2">Thanks, I also have a 1296 engine what kind of carburation do you have with you r engine?</font>


---- Original Message -----
<blockquote style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<div style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black">From: John Friese
<div style="FONT: 10pt arial">To: amphicar-lovers@yahoogroups.com
<div style="FONT: 10pt arial">Sent: Sunday, July 15, 2007 9:21 AM
<div style="FONT: 10pt arial">Subject: [amphicar-lovers] Re: tire pressure


<div id="ygrp-text">


Hello,

I've run Coker bias play tires for 6 years and use the original tire
pressures given by Amphicar, 14 in the fronts and 30 in the rears.
Gordon's even sells a replacement placard with the numbers on it.
These pressures work just fine for bias ply tires and I routinely
drive my car at 70 and sometimes drive up to 85 mph with no problems
and no front end "float". Yes, I have a "hot" 1296 engine in it.

John Friese
67 White
67 Red

--- In amphicar-lovers@<wbr>yahoogroups.<wbr>com, "injuneer2003"
<injuneer2003@<wbr>...> wrote:
>
> Any information about the correct tire pressures to be used with cocker
> bias ply tires?
>
> I vaguly remember reading about pressures that are not the same as in
> the manual. Is this true?
>
> Can someone shed some light on this subject for me?
>
> Thank You
>

</blockquote>
 
J

John Friese

Guest
Hi,

I run a Weber DGV 5A carb. on a Pierce manifold. The system normally
comes jetted for a 1500 engine and I find the engine runs best with a
bit larger high speed jet and accelerator pump jet installed. I'm
still playing with minor variations on these jets to come up with the
perfect match but it runs quite well with the jets that originally
came with it and I used it that way for several years. I'm just a bit
picky.

John Friese
67 White
67 Red



--- In amphicar-lovers@yahoogroups.com, "Fran" <yhprum.fa@...> wrote:
>
> Thanks, I also have a 1296 engine what kind of carburation do you
have with you r engine?
>
>
> ---- Original Message -----
> From: John Friese
> To: amphicar-lovers@yahoogroups.com
> Sent: Sunday, July 15, 2007 9:21 AM
> Subject: [amphicar-lovers] Re: tire pressure
>
>
> Hello,
>
> I've run Coker bias play tires for 6 years and use the original tire
> pressures given by Amphicar, 14 in the fronts and 30 in the rears.
> Gordon's even sells a replacement placard with the numbers on it.
> These pressures work just fine for bias ply tires and I routinely
> drive my car at 70 and sometimes drive up to 85 mph with no problems
> and no front end "float". Yes, I have a "hot" 1296 engine in it.
>
> John Friese
> 67 White
> 67 Red
>
> --- In amphicar-lovers@yahoogroups.com, "injuneer2003"
> <injuneer2003@> wrote:
> >
> > Any information about the correct tire pressures to be used with
cocker
> > bias ply tires?
> >
> > I vaguly remember reading about pressures that are not the same
as in
> > the manual. Is this true?
> >
> > Can someone shed some light on this subject for me?
> >
> > Thank You
> >
>
 
Top