Tech articles

  • Thread starter Marty_Peters@gillette.com
  • Start date
M

Marty_Peters@gillette.com

Guest
We have been looking for tech articles and only find a few
splatterings here and there (thanks Dave). Is there a site or a good
tech type book that offers articles in some depth such as something
as
simple as point gap, plug gap, timing or even all around wrenching
chat. I can not speak for everyone; but I enjoy working on my cars
and do appreciate a good tech book. I'm sure there is a mass of info
out there that may assist others as well. It would be nice to have a
tech page on Amphicar.com where issues, ideas, problems solved and
maintenance data could be shared. Any views on this out there.

Marty & Caryl
BUOYANT 64 Turq
 
M

Marty_Peters@gillette.com

Guest
Re: Re: Tech articles

John

I hope your elbow surgery works out well, good luck.
Thanks for getting back to me on the tech stuff. For some reason when
I go to Amphicar.net, it hangs up on the main page...any clues.

I really like to read in depth tech articles on how and why things
work. Troubleshooting chapters are nice too, as they sometimes
contain help in directions that are otherwise missed.

I did read something a week or so ago that Dave the Wave inserted
about if you see grease below a wheel tunnel, what that means and what
to do. The legal size Amphicar book goes into just so much detail, if
you know what I mean. Articles I write are so complete, anyone off
the street could use them.

Mostly anything that will make working on the cars more of a joy than
an all out search.

Thanks again, I appreciate your input.

Good Swimming

Marty


______________________________ Reply Separator _________________________________
Subject: [amphicar-lovers] Re: Tech articles
Author: amphicar-lovers@egroups.com ("John Bevins" <johnbev@exabyte.com>) at
GILLETTE
Date: 8/30/00 10:57 AM






--- In amphicar-lovers@egroups.com, Marty_Peters@g... wrote:
> We have been looking for tech articles and only find a few
> splatterings here and there (thanks Dave). Is there a site or a
good
> tech type book that offers articles in some depth such as something
> as
> simple as point gap, plug gap, timing or even all around wrenching
> chat. I can not speak for everyone; but I enjoy working on my cars
> and do appreciate a good tech book. I'm sure there is a mass of
info
> out there that may assist others as well. It would be nice to have
a
> tech page on Amphicar.com where issues, ideas, problems solved and
> maintenance data could be shared. Any views on this out there.


Marty,

I have been (albeit slowly lately) working on just that sort of page!
I have some information listed
(http://www.amphicar.net/minnow/index1.htm) under "Technical Info."
If anyone would send me what they have or would like to see I will
gladly add it. I am going in for elbow surgery on the 15th, when I
get out I will have some tiome on my hands to work on it. It should
be interesting doing it all left handed!

Cap'n John


To unsubscribe from this group, send an email to:
amphicar-lovers-unsubscribe@egroups.com
 
J

John Bevins

Guest
--- In amphicar-lovers@egroups.com, Marty_Peters@g... wrote:
> We have been looking for tech articles and only find a few
> splatterings here and there (thanks Dave). Is there a site or a
good
> tech type book that offers articles in some depth such as something
> as
> simple as point gap, plug gap, timing or even all around wrenching
> chat. I can not speak for everyone; but I enjoy working on my cars
> and do appreciate a good tech book. I'm sure there is a mass of
info
> out there that may assist others as well. It would be nice to have
a
> tech page on Amphicar.com where issues, ideas, problems solved and
> maintenance data could be shared. Any views on this out there.


Marty,

I have been (albeit slowly lately) working on just that sort of page!
I have some information listed
(http://www.amphicar.net/minnow/index1.htm) under "Technical Info."
If anyone would send me what they have or would like to see I will
gladly add it. I am going in for elbow surgery on the 15th, when I
get out I will have some tiome on my hands to work on it. It should
be interesting doing it all left handed!

Cap'n John
 
J

John Bevins

Guest
--- In amphicar-lovers@egroups.com, Marty_Peters@g... wrote:
> We have been looking for tech articles and only find a few
> splatterings here and there (thanks Dave). Is there a site or a
good
> tech type book that offers articles in some depth such as something
> as
> simple as point gap, plug gap, timing or even all around wrenching
> chat. I can not speak for everyone; but I enjoy working on my cars
> and do appreciate a good tech book. I'm sure there is a mass of
info
> out there that may assist others as well. It would be nice to have
a
> tech page on Amphicar.com where issues, ideas, problems solved and
> maintenance data could be shared. Any views on this out there.


Marty,

I have been (albeit slowly lately) working on just that sort of page!
I have some information listed
(http://www.amphicar.net/minnow/index1.htm) under "Technical Info."
If anyone would send me what they have or would like to see I will
gladly add it. I am going in for elbow surgery on the 15th, when I
get out I will have some tiome on my hands to work on it. It should
be interesting doing it all left handed!

Cap'n John
 

Similar threads


Top