seal replacement

[wick68355@aol.com]

<table id="role_body" style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial" bottomMargin="7" leftMargin="7" topMargin="7" rightMargin="7"><font id="role_document" face="Arial" color="#000000" size="2">
Last year when I did the Left Front, I replaced the seal using a large cap from an oxygen tank. It was the perfect size and I simply pounded it on using the cap as a shade tree mechanic driver.
Tim Wick</font>

 

[Terry Cassem]

<table>
Good info! I went to Lowe's in the plumbing section and got a (white) 3" diameter x about 4" long sewer pipe end and the screw-in cover which has the square end for a wrench in the center. It worked great for pounding. I like the PVC since it is softer than the metal seal. Also used different sizes of PVC pipe for pounding in the races for bearings.



Captain Terry







on 6/9/06 7:54 AM, wick68355@aol.com at wick68355@aol.com wrote:



<blockquote><font SIZE="2"><font FACE="Arial">Last year when I did the Left Front, I replaced the seal using a large cap from an oxygen tank. It was the perfect size and I simply pounded it on using the cap as a shade tree mechanic driver.

Tim Wick

</font></font></blockquote>