Parts Changes

Canadian four amphs

Amphicar Expert
I have not changed most of the prices in my parts list since 2001
but am going threw the whole list now and there are alot of increases going to happen very soon.
go on my web page now and check those big items off as within the month it will be changed!
I am in the process of moving my office to the basement where my parts are kept so that when you phone I can go and manhandle the parts to make sure we have them etc.(really the wife wants the spare bedroom back for all the expecting grand kids!)
I have another load of used parts coming after this eweekend, to go threw and stock.I do not list used parts on my parts list and inventory is growing, so do not be afaid to call or email what you may be looking for.
BTW I was talking with a fellow about front hoods and he was complaining about drilling hole to mAKE HOOD fit on hindges and no metal in front where clamb shells are.I thought everyone knew that I make the best fibreglass front hoods! There are moveable predrilleed and treaded brackets for the hindges,horn hole is cut out and treaded 8mm.Safty at front is drilled threw alu. 6mm tread. catches are threw alum drilled and 4mm tread just as they are on steel hoods..the inside of my hoods are a smooth as the outside and when painted you can not tell they are glass untill you lift them your self as they are very LIGHT!But strong, Ron Trudeau had 3 mermaids laying across his hood for a photo shot in 2005. I used the hood off one of my good Amphicars to make the mold for this glass hood and are almost perfect the way you get them,Just drop on and GOOO!!!!
Come to my Swin in June 25-28 and have a tour of my shop and Parts department.
GORD
 

Ed Price

Member
Gord:

Get a bunch of good photos, cook up some short captions, and we will be
happy to spread them into the WnW.


Ed Price
IAOC Membership Registrar
El Cajon, CA USA
61 Rust Guppy



_____

From: Canadian four amphs [mailto:]
Sent: Wednesday, May 27, 2009 4:57 AM
To: edprice@cox.net
Subject: [General Amphicar Discussion-t-20437] Parts Changes


I have not changed most of the prices in my parts list since 2001
but am going threw the whole list now and there are alot of increases going
to happen very soon.
go on my web page now and check those big items off as within the month it
will be changed!
I am in the process of moving my office to the basement where my parts are
kept so that when you phone I can go and manhandle the parts to make sure we
have them etc.(really the wife wants the spare bedroom back for all the
expecting grand kids!)
I have another load of used parts coming after this eweekend, to go threw
and stock.I do not list used parts on my parts list and inventory is
growing, so do not be afaid to call or email what you may be looking for.
BTW I was talking with a fellow about front hoods and he was complaining
about drilling hole to mAKE HOOD fit on hindges and no metal in front where
clamb shells are.I thought everyone knew that I make the best fibreglass
front hoods! There are moveable predrilleed and treaded brackets for the
hindges,horn hole is cut out and treaded 8mm.Safty at front is drilled threw
alu. 6mm tread. catches are threw alum drilled and 4mm tread just as they
are on steel hoods..the inside of my hoods are a smooth as the outside and
when painted you can not tell they are glass untill you lift them your self
as they are very LIGHT!But strong, Ron Trudeau had 3 mermaids laying across
his hood for a photo shot in 2005. I used the hood off one of my good
Amphicars to make the mold for this glass hood and are almost perfect the
way you get them,Just drop on and GOOO!!!!
Come to my Swin in June 25-28 and have a tour of my shop and Parts
department.
GORD
 

Canadian four amphs

Amphicar Expert
Right now I can not send out photos for some reason, 9 are lost in noo no land..
Pick up load of Parts used arived yesterday. a full wheel barrow of it was not Amphicar stuff (as usual) but alot of good things to so very happy with the load.
An early style trans housing, looks like never been in a car, some rear axle swing arms. more junk axles to sort threw.
good engine block and bits.
and luckly more brake shoes I can use as cores as many people are very slow to get cores back to me.
gotta go now and get ready for London Ont. show this weekend,
We will have 10 Amphicars there!(fleetwoodcountrycruizin.com)
GORD
 
Top