W
Wayne & Kathy
Guest
I did not rewire my gauge . I added two gaskets one under the sending unit
and one under the gauge. I retapped the gas tank to u.s. 10/24 and gauge to
u.s.6/32 thread and used nylon bolts. you need to run a battery positive
wire to one mounting bolt on each unit to complete the circuit on the now
isolated gauge and sending unit. I put a fuse in battery feed wire, use a
key on feed. My gauge works fine. Wayne Schmiedlin 608-837-3948 need
help call Wayne & Kathy Kathy's dream red 63
</td></tr>
Attachment: (image/jpeg) scan0.jpg [not stored]
and one under the gauge. I retapped the gas tank to u.s. 10/24 and gauge to
u.s.6/32 thread and used nylon bolts. you need to run a battery positive
wire to one mounting bolt on each unit to complete the circuit on the now
isolated gauge and sending unit. I put a fuse in battery feed wire, use a
key on feed. My gauge works fine. Wayne Schmiedlin 608-837-3948 need
help call Wayne & Kathy Kathy's dream red 63
</td></tr>
Attachment: (image/jpeg) scan0.jpg [not stored]