E
Ed Price
Guest
A long time ago, Mike Echemann wrote:
Steve, Page 4/5 of the manual specifically states:
" Attention: The radial oil seal lip must face to the outside of the bore"
I know there has been some discussion regarding different opinions on this
but it makes sense to me.
On removing the original front seals on my car, I noticed that the lip faced
inboard, toward the centerline of the Amphi. Am I reading Mike's advice
correctly, that the lip should face outboard, toward the castle nut on the end
of the spindle?
Ed
El Cajon
67 Rust Guppy
[Non-text portions of this message have been removed]
Steve, Page 4/5 of the manual specifically states:
" Attention: The radial oil seal lip must face to the outside of the bore"
I know there has been some discussion regarding different opinions on this
but it makes sense to me.
On removing the original front seals on my car, I noticed that the lip faced
inboard, toward the centerline of the Amphi. Am I reading Mike's advice
correctly, that the lip should face outboard, toward the castle nut on the end
of the spindle?
Ed
El Cajon
67 Rust Guppy
[Non-text portions of this message have been removed]
