florida

W

wick68355@aol.com

Guest
<table style="FONT-SIZE: 10pt; FONT-FAMILY: Arial; BACKGROUND-COLOR: #ffffff">
I will be in Naples Florida from March 22 to March 30. If any of our fine finned amphibian friends will be in the area and are interested in getting together for a chance to talk stupid or to have a beer call me on the cell phone. 1-414-828-3600 during those dates or email me before the 22nd.
Tim Wick
Wisconsin
 
G

Gord Souter

Guest
I'm back too.. but wish I was not,
Has not stopped snowing since I got home
Mon. am and is still snowing now!
no build up but darn annoying.
Peter Fredsal in Daytona beach is our movie man and has allot of good film
from past meets etc.
I always send him copies of any thing I take. in turn he sent me a copy of
that( cotton pickin chicken film.....yuck!)
Only had one problem with my Amphicar down in FL... the door hindge,(lower)
sheared the pivot shaft right off which made closing the door fun but it did
stay water tight.
I am now in the process of repairing it.. that's even more fun.
the Hinges were welded into place before the front fender was installed so
in order to drill out the old pin, you must remove the seat, steering wheel.
side triangle. and door.
then get a light and you face in that small area and drill out the remains
with a tiny angle drill.I was able to remove the lower half with a air
chisel. Today I will but a new shaft and bushings as in most domestic cars
and reinstall!
To prevent this from happening to your car I recommend that you oil these
hinges once a year.To do this you must remove the Triangle kick panels.or
maybe go in threw the trunk, If you do not have the Fender type blower.
(Teck tip for you to print ED)
I sent a Clock plate out to Jim Davies in Rochester and I think he almost
has new face decals ready for them, Let me know if you would like to have
some and will put them on order.

The Orillia swim in is set for the weekend of June 21-24. We have 4 days of
Canadian adventures planed, with a special Sat. trip threw something I
think all will enjoy.
Come up and see our clean clear Lakes and rivers...(that are not down 4 ft)
On the same weekend Orillia has a Christmas in June boat display and the
Micro cars have there meet too. go to (www.orillia.com)......my web site is
(www.amphicar.ca) and will try to post some info of the show on it.
I am 100 miles north of Toronto On. about 3 hours from Buffalo and 5 hours
from Detroit or Port Huron ( easier crossing)
Gord Souter,Canadian 4 amphs,
3860 Carlyon line
RR4 ORILLIA ONT.
L3V 6H4

MY new phone # is 1 705 327 2820

I buy, sell and restore Only Amphicars
over 700 different parts for sale.
Interior kits and fibreglass panels my specialty!



---
[This E-mail scanned for viruses by Declude Virus]
 
G

Gord Souter

Guest
I'm back too.. but wish I was not,
Has not stopped snowing since I got home
Mon. am and is still snowing now!
no build up but darn annoying.
Peter Fredsal in Daytona beach is our movie man and has allot of good film
from past meets etc.
I always send him copies of any thing I take. in turn he sent me a copy of
that( cotton pickin chicken film.....yuck!)
Only had one problem with my Amphicar down in FL... the door hindge,(lower)
sheared the pivot shaft right off which made closing the door fun but it did
stay water tight.
I am now in the process of repairing it.. that's even more fun.
the Hinges were welded into place before the front fender was installed so
in order to drill out the old pin, you must remove the seat, steering wheel.
side triangle. and door.
then get a light and you face in that small area and drill out the remains
with a tiny angle drill.I was able to remove the lower half with a air
chisel. Today I will but a new shaft and bushings as in most domestic cars
and reinstall!
To prevent this from happening to your car I recommend that you oil these
hinges once a year.To do this you must remove the Triangle kick panels.or
maybe go in threw the trunk, If you do not have the Fender type blower.
(Teck tip for you to print ED)
I sent a Clock plate out to Jim Davies in Rochester and I think he almost
has new face decals ready for them, Let me know if you would like to have
some and will put them on order.

The Orillia swim in is set for the weekend of June 21-24. We have 4 days of
Canadian adventures planed, with a special Sat. trip threw something I
think all will enjoy.
Come up and see our clean clear Lakes and rivers...(that are not down 4 ft)
On the same weekend Orillia has a Christmas in June boat display and the
Micro cars have there meet too. go to (www.orillia.com)......my web site is
(www.amphicar.ca) and will try to post some info of the show on it.
I am 100 miles north of Toronto On. about 3 hours from Buffalo and 5 hours
from Detroit or Port Huron ( easier crossing)
Gord Souter,Canadian 4 amphs,
3860 Carlyon line
RR4 ORILLIA ONT.
L3V 6H4

MY new phone # is 1 705 327 2820

I buy, sell and restore Only Amphicars
over 700 different parts for sale.
Interior kits and fibreglass panels my specialty!



---
[This E-mail scanned for viruses by Declude Virus]
 
Top