Dressing up turn signal levers



Another helpful tip for my fine finned fiends ;)....

While working on a customer's car I came up with a temporary
solution for those rusty turn signal levers w/o having to re-chrome

I used a length of aluminum type duct tape about 1/4" wide to cover
it. I placed it so the seam would be on the back of the stalk. Then
take a dab of Flitz alum polish to make it shine. It looks like new!
Once I get the time to remove it, I can get it re-chromed at that
time. So at least for now, it looks good.

John Bevins
Rocky Mountain Amphicar