all sorts of suff

G

Gord Souter

Guest
#1
. They want to send a check for large amount of money. I'm supposed to
deposit the check, subtract what I need and forward the rest to the shipping
company. Of course in 10 days the check turns up bad and I would be stuck
with the whole mess.

Scot..same scame they used on me on the interior kit last year.
I to walked away from them.

#2 --

From: Dave Derer <dmd@essex1.com>
Subject: rear axle boot

Any one come up with a better rubber boot for rear axles? So far the
best seems to be exhaust tube. Later Dave the Wave

Dave/// take a look at my parts list right near the very top I say
part#875827 VOVO PENTA DRIVE BELLOWS for 100 I/O
Take this # to your local dealer in States to order
it is very soft and flexable.4 in. dia. by 5 in long fits loose but will
clamp up tight and is made exactly for this job!
it list out for about $50.00
_____#3.
00
From: "Jim Davis" <thedavisman@hotmail.com>
want to know if anyone is interested in
getting the inner fenders complete with the pressed ribs. Don't know
the cost yet, but will advise.
jim davis

Hugh Gord has steel iNner parts including the metal above the tire hump on
rear
I have complete rear fenders in Fiberglass (they will never rust again!!!)
#4
stripper chemical. When I tried the Amphi, it's a real pain. Even tried
stripeze and a stripper from POR15. Has anybody had any success with
anything? ONLY THING I HAVE USED ON UPPER BODY PARTS THAT WILL REMOVE IT IS
SANDPAPER!!!!
. I am also looking for a color code or PMS color or formula for the
original red. I will be using ICI's two part urethane.
1990 CHYSLER HAS A COLOUR THATS CLOSE.
I USED 2000 VIPER RED ,,,IT BRIGHTER!!!.
I CAN TAKE A ORGINAL RED PART IN AND GET IT SCANNED BUT SO CAN YOU//

GORD SOUTER 4 amphs



-----



---
[This E-mail scanned for viruses by Declude Virus]
 

Similar threads

M
Replies
3
Views
663
nelson625@aol.com
N
K
Replies
1
Views
524
Mike Israel
M
Top